Enclosure Sealing for EV Charging Points
While the number of EV charging station installations is increasing, it’s crucial to ensure they operate reliably to meet the growing demand of EV drivers and fleet operators. As many installations are outdoors, they require robust protection against corrosion and reliable safeguarding from extreme environments. Our closed-cell compressible foam tapes offer quick and precise assembly, rapid curing time, no squeezing or oozing, and permanent sealing against water, dirt, and air. These materials remain flexible in both hot and cold climates, ensuring the functionality of the enclosures.
Enclosure Sealing Material Selection Guide
Product Code | Thickness, mm | Flame Performance | ‡Compression Set, % | Density, Kg/m3 | CFD (kpa) | Key Features | Optional Features |
F-15 | 1-3.2 | UL94 V-0 | <10% | 240 | 40* | Low density and low compression set | Acrylic PSA version (515GF) |
F-20 | 0.8, 1.6, 3.2, 4.8, 6.4, 9.6, 12.7 | UL94 V-0 | <10% | 320 | 70* | Medium density and low compression set UL 50E and UL 508 rated | Acrylic PSA version (520GF) |
* 50% Compression per ASTM D1056.
‡ Refer to individual datasheets for specific test conditions and typical values.
Product Code | Thickness, mm | Flame Performance | ‡Compression Set, % | Density, Kg/m3 | CFD (kpa) | Key Features | Optional Features |
Dynafoam® 7440FC | Up to 7 | – | <20% | 220-280 | 12-25** | Single component, foam-in-place, good water seal | Range of density and thickness |
FS1000 | 4.5, 6, 9 | UL94 V-0 | <10% | 240 | 5-15** | Intumescent, air-tight, watertight | Permanent PET liner |
PS-V0 | 6, 9, 12 | 250 | 30** | Low density and water tightness | Acrylic PSA version | ||
3.5, 6, 8 | 350 | 70** | Medium density and water tightness |
** 30% Compression per ASTM D1667.
‡ Refer to individual datasheets for specific test conditions and typical values.
